IELTS writing SAMPLE

How Are Bricks Made?

24
Video How are bricks made

Millions of bricks are manufactured each year all over the world.

But have you ever stopped to wonder how they get made?

Bạn Đang Xem: How Are Bricks Made?

Read more: How are bricks made

Brickmaking has changed significantly since we first started making them. Check out our history of bricks and brickmaking for more on that.

The process has been somewhat refined over the years and now modern brick manufacturing follows a very particular process.

In this post, we’ll be going through how a typical kiln-fired brick is made.

Raw Materials

The main ingredient of most bricks is clay. It always has been.

There are particular kinds of clay minerals that are more suited to making bricks and often the location of the clay can have an impact on the colour of the end product.

What else is in a brick?

A big component of brick is the addition of sand. Many bricks also contain other additives such as Lime, Iron Oxide and Magnesia which offer other benefits.

The final crucial ingredient in the brick making process is water.

The Manufacturing Process

We now come to the manufacturing process itself.

As we mentioned above not every brick you see will be made in the format we explain below, but the vast majority of fired bricks are.

1. Crushing/Grinding

First off, the dry, raw clay material is crushed and ground in what’s called a jaw crusher. This turns the material into smaller particles and it’s at this stage that the other materials are added.

Different size pieces are separated and larger pieces are set aside for pummelling so they can be used in another batch.

2. Forming Bricks

There are a number of different options for this stage that are used around the world today.

Learn More: Alternative energy sources reading answer

Xem Thêm : World Environment Day Essay

Extrusion (or Wirecut) is the most popular as it is the one which provides the lowest cost for producing bricks at scale – it’s very much the mass-produced option.

Here’s some detail about the three most common forms of brick manufacture.

Extrusion (or Wirecut)

After crushing, the pulverised material is fed into one end of a pug mill. The material is then folded together so it’s all properly mixed.

It’s then fed into the extruder where it goes through a further two phases – All the air is removed in a vacuum and the material is compacted.

The brick shape is formed by pushing the material through a die. This is an orifice in the end of the machine shaped into the cross section of a brick.

Sections of the desired length are then cut off with saws or wires or in some cases a long cable is formed and then cut into segments from there.

The dies allow for a certain degree of versatility in production. For example, cylindrical sections can be included to create holes in the brick.

Moulding

Soft wet clay is shaped by a mould. With handmade bricks this clay will be thrown into the mould – often a wooden box coated with sand and left to dry.

In larger scale manufacturing, a hydraulic press will compact the material into the required shape. The sand on the inside of the mould helps with the removal of the brick and also gives it a certain surface texture.

Pressing

This is similar to the moulded method but uses much thicker clay and greater force in pressing.

The thick clay mix has a lower water content which when pressed leads to a more accurate, sharper edged brick. The material is placed in a die and then compacted with a steel plunger. This can be set at different pressures.

These plungers often feature ‘frogs’ – the indent you see in the top of some bricks – and will have that sharper outline.

This is a more expensive process, particularly as longer firing is usually required, but it creates much more durable bricks.

3. Optional Steps

After these production techniques, some manufacturers may choose to include some other steps, depending on the requirements of the brick.

These include chamfering, which involves having a roller to make an indent or apply a furrow as it exits the extruder.

Some bricks may also be coated with sand, either by a vibrating machine coater, pressure roller or for the hardest material, a sand blaster.

4. Drying

Watch more: 36 Best Celebration Invitation Messages for Colleagues

Xem Thêm : Alternative energy sources reading answer

Once the brick itself has been made, it needs to dry.

Removal of excess moisture is important. If it’s not removed, it will evaporate too quickly during firing and cause cracking, thus ruining the brick.

There are a couple of ways to dry large amounts of brick. For a long time, the most common way of doing this was by using tunnel dryers.

These consist of a long chamber through which the fresh ware is slowly pushed. Fan circulated hot air is forced into the dryer covering the bricks.

Automatic chamber dryers are also in wide use. Bricks sit on extruded bars and are placed in rows where they are dried in the heavily regulated climate.

5. Firing

The next major step in making bricks is the firing process.

Generally, bricks will stay on the same cars used for the drying process to take them into the kiln. This is where firing takes place.

Kilns have evolved significantly over the years, increasing capacity, consistency and economic efficiency.

Most kilns in operation are tunnel kilns, whereby bricks are pushed through a long, specially built tunnel, whilst being fired.

They used to be high and narrow. Now they’re generally lower and wider, allowing more bricks to be fired at once.

Most bricks these days are gas fired in order to better regulate a continuous temperature. But in some cases, a coal fire may be used.

6. Unloading

The final part of the process involves allowing the bricks to cool and then be unloaded.

They are removed or ‘dehacked’ from the cars and then ‘set’ in stacks where they can then be wrapped and packaged for distribution.

We Love Bricks

If you hadn’t realised, we love bricks. And we love finding out where they come from. We hope you found this interesting too.

Maybe it’s given you a greater appreciation for the brick making process.

If this has got you in the mood for some brick browsing before Christmas, then check out our brick library section.

Learn More: Reading Test 28 Question 27-40

Nguồn: https://cinemaboxhd.org
Danh mục: IELTS writing SAMPLE

0 ( 0 bình chọn )

IELTS Online Exam & Sample Questions

https://cinemaboxhd.org
IELTS Online Plus, considering your test centre offers this, you will take the Listening, Reading and Writing

Ý kiến bạn đọc (0)

Leave a Reply

Your email address will not be published.

Related Posts

News Post

Xem thêm